So, you're
looking into Renewable Energy (RE) and it's brought you here.
There are only a few books out there right now that talk about
RE and none of them talk about how to do it on "the cheap" and still keep
it simple. There are some great wind turbine do it yourself
books that talk about hand carving blades out of wood and how to make your
own generator from scratch. This includes even winding your own
coils, welding , etc. But still, this is cheap but not
very simple.
I believe there
is too much waste in the world right now. I love the concept of
taking something labeled as "junk" and making it new again. I hate
to see batteries go to scrap when it is easy to get some more life out of
them. Imagine all that lead and sulfuric acid has to go somewhere
and I'm always afraid it will impact the environment or the water
supply.
I wrote this book for
the thrifty person and the "recycler". Someone who wants to get
started into renewable energy and not break the bank in the process.
Someone who hates to see scrap sit around and go to waste. Someone who
wants to become independent from the grid and help the environment.
Some people even buy this book so they can refurbish forklift batteries as
a business. Imagine getting a free forklift battery that normally
costs $4000 new. You recondition it in 30 days and sell it locally
for $1500. And you don't even need a truck to do it. I'll show
you how to have the batteries dropped off and picked up.
This e-book is full of
pictures and diagrams to explain the concepts. In it I cover the
following and a lot more:
First windmill
Second Windmill
p>
how to make FREE windmill blades and it will only take about
an hour to finish a set of 3.
a page full of equations and examples
of how to use them to figure out power, rpm, tsr, windspeed etc.
(units are in miles per hour and feet)
how to find FREE fork lift
batteries and how to make them as good as new
making a homemade
de-sulfator so you can "pulse" any battery back into new
condition
what kind of
generator to look for and how to get the best prices
how to make a simple
"furling" system to protect the windmill in high winds
how to charge
several banks of batteries all at once while pulsing them back to
health
How to make a 1,000 watt wind
turbine for less than $150 (including tower)
How to make a 3,000 watt wind turbine for about
$220!
Download includes the DC Motor Analyzer
software
Here is an excerpt from the
book...
Introduction
We can all see how gas prices and energy costs are
rising. And there is no indication that they will fall in the
near future. In fact, all the evidence points to higher and
higher prices in the upcoming years. That is reason enough to
look into renewable energy but certainly not the only reason.
Some people purchase rural property for a very low cost. But
it is so low because there is no electrical lines run to the
property. And it may cost $25,000 plus just to have it
run. Some people just don't trust that the “grid” will always
be there and would like some independence from it. Whatever
your reason for being energy self-sufficient, you are probably
looking into one of two things. Solar power or wind
turbines.
I actually like both and believe that they
compliment each other. This is especially true when you have a
very windy winter but overcast and rainy. Then in the summer
you have good sun, but not as much wind.
But I believe that a solar (photo voltaic) system is
way too expensive for the average person. I do believe in
solar hot air and water systems though, especially home made
versions. They can be very inexpensive. But this book
will focus on wind turbines and cheap or free battery systems.
And not the store bought wind turbines, but the homemade
variety.
Why pay $1,000 for a 400
watt store bought wind turbine when you could make a 1,000 watt
machine of your own for only $150? Why pay $4,000 for a 1400
amp hour 12 volt battery bank when you can get one for
free?
This e-book now
includes a section on building a 3,000 watt wind turbine with 11 foot
diameter blades.
This download
also includes the new DC Motor Analyzer software. Just take a look.
Here are some pictures from Tim in
Wales. He just
completed a 1,000 watt wind turbine. Notice the blades are 9 feet in
diameter. He has almost completely desulfated a 24 volt forklift
battery. Gret Job, Tim!
F.A.Q.
Q: How many
megabytes is this e-book? A: It is 45 pages, 3.3 MB
and full of color pictures and diagrams and it is an instant
download.
Q: Can I really get
free batteries A: Absolutely, yes. In
the book I show pictures of 2 forklift batteries I picked up for
free. These are each 24 volts, 700 amp hours. Or 12 volts at
1400 amp hours if you parallel the two halves. Both batteries
together are 12 volts at 2800 amp hours. That is the equivalent to
28 golf cart batteries. That's $2,000 - $3,000 worth of golf cart
batteries. Or about $8,000 in forklift batteries if they are
purchased new.
Q: How long
is a forklift battery rated for? Does it last longer than golf cart
batteries? A: Forklift batteries are
rated for 20 years while golf cart batteries are only rated for 5
years. They are both considered "traction" batteries and are deep
cycle. In comparison, running your house on a large bank of car
batteries would only last about 6 months of heavy
cycling.
Q: Are the blades
really free, and how long does it really take to carve them?
A: Yep, the blades are free except for the
work you put into them. My first set took about 3 hours because
I didn't know what I was doing. Now I can carve 3 blades in about an
hour.
Q: I know someone
with a small windmill that produces 400 watts, but, My God, that thing is
loud. How loud will your homemade windmill be? I have
neighbors you know. A: I've gone
through about 10 iterations of blade testing and all of them have been
quiet, even in high winds. The only difference is that most of those
designs weren't as efficient as my latest. These blades start
spinning in about 3 mph wind. They start charging a 12 volt
battery at about 5 to 12 mph wind (depending on generator
used).
Q: Can I power my
house from one windmill? A: Simple answer is yes, but it wouldn't be
practical for most.
In this book I look at practical. People use way more power than they
think. "Could you power your whole house with 1 solar panel?"
Well, yeah, if it were really big! In the book I look
at the power you use and talk about conservation being key. Another main concern is average
windspeed in your area. Then I show equations to figure
out how much power to expect. On the average, most people
would need about 2 to 10 small windmills ( or 1
to 5 of the 3,000 watt ones) on their property to become energy
independent. Remember, it's not how powerful the windmill is, it is
all about average wind speed. A 10,000 watt windmill with a 20 foot
blade will only produce about 250 watts in 8 mph wind. But in 16 mph
wind, it would be 8 times that...or 2,000 watts.
Q: What if I
would rather have one big one instead of 10 smaller
ones? A: First
reason is tower strength. A 7 foot blade set will have a loading of
about 86 pounds of force from a 20 mph wind. A 21 foot blade would
produce about the same power as 9 smaller windmills (7 foot) but the same
wind would push on the tower with 775 pounds of force. And since the
generator and tail are bigger, then you are looking at a very strong and
expensive tower. It may take a small team just to raise
it.
Also, the bigger the blade, the
slower it spins. So you will need to gear up the output or use a
homemade generator....more complexity.
And, thirdly, if you use a single
big generator and it fails for some reason, then you have no backup.
Why put all your eggs in one basket.
Isn't it easier to build a small
generator that you can install by yourself and build more as
needed?
This is an e-book in PDF
format. Upon successfully purchasing, the link to download the e-book
will be shown to you. It is 45 pages long in full color and the download is 3.3
MB in size. It takes about 10 to 15 seconds to
download when using cable modem or DSL. It will take about 4 to 5 minutes
with dialup. You will need winzip to open the compressed download.